Standing Seam Metal Roof Cost in Florida (2026)
Standing seam is the premium metal roof, and in Florida it is priced per linear foot of panel, cut to length. Our five standing seam profiles run $2.61–$9.69/ft depending on profile, gauge and finish.
This page gives the per-foot and per-square-foot prices for every panel, a worked example for a 2,000 sq ft home, and what is and is not included. All prices are material only — we supply the panels, trim and clips; you or your contractor install.
Standing Seam Price Per Linear Foot (2026)
Every panel below is cut to length in Tampa and carries a Florida Product Approval. Prices are per linear foot of panel.
- IronSeam 150 (Snap-Lock Standing Seam 1.5" (16")): $2.61–$8.49/ft
- TrueShield 100 (Nail-Strip Standing Seam 1" (16")): $2.61–$8.49/ft
- TrueShield 150 (Nail-Strip Standing Seam 1.5" (15")): $2.61–$8.49/ft
- ForgeSeam 175 (Commercial Standing Seam 1.75" (16" or 18")): $3.87–$9.69/ft
- ForgeSeam 150 (Clip-Lock Standing Seam 1.5" (15")): $2.61–$8.49/ft
Worked Example: 2,000 sq ft Home at 6:12 Pitch
A 2,000 sq ft footprint at 6:12 pitch has about 2,236 sq ft of sloped roof area (2,000 × 1.118 pitch factor). Standing seam panels cover about 3 ft of width each, so the linear feet of panel needed is roof area ÷ coverage width. Adding 5% waste: about 780 linear feet.
At $4.99/ft for IronSeam 150 in 26ga Kynar 500, the panel material for that roof is roughly $3,892 (material only, estimate). Trim, clips, underlayment and delivery are extra.
What Is Not Included
Trim (rake, eave, ridge, valley), clips, fasteners, underlayment, closure strips and delivery are priced separately. Labor is not included — we are a material supplier. For a full trim-out quote, call (813) 410-7427 with your roof dimensions.