TrueShield 150
15" Nail-Strip Standing Seam · 1.5" Rib
TrueShield 150 pairs a bold 1.5" rib with the fast screw-flange install of our nail-strip line. Screws go through a hidden flange and are covered by the next panel, so the finished roof shows no fasteners.
$290 flat delivery
Anywhere in Florida, any size order
FREE delivery
On orders over $5,000
Ready in 3 business days
or less, depending on order size
Volume pricing: 3% off $5K+, 5% off $10K+, 8% off $20K+, 10% off $30K+ (aluminum max 5%)
Panel width
15"
Rib height
1.5"
Min. slope
3/12 (0.5/12 with lap sealant)
Substrates
26ga or 24ga Galvalume steel; .032" aluminum
About this panel
A taller rib without the clips
Bolder shadow line
The 15" panel width and taller rib give a stronger shadow line than the 1" panel. Approved for roofs as low as 3/12, or 0.5/12 with lap sealant.
Where it fits best
Homes and outbuildings that want the height of a 1.5" seam with the speed of a screw-flange install. Available in 26 and 24 gauge steel and .032 aluminum.
Panel features
Specs at a glance
- Panel width15"
- Rib height1.5"
- Min. slope3/12 (0.5/12 with lap sealant)
- AttachmentConcealed screw flange (low-profile pancake screws)
- Substrates26ga or 24ga Galvalume steel; .032" aluminum
- FinishesGalvalume, SMP, Kynar 500
- LengthCut to length, up to 40 ft online (up to 55 ft by phone)
Panel profile
TrueShield 150
Pricing
Price per linear foot
Cut to your length. Same price online, by phone and at the counter.
26 Gauge
Galvalume (mill finish)
Order →
$2.61/ft
26 Gauge
SMP painted
Order →
$3.66/ft
26 Gauge
Kynar 500 painted
Order →
$4.99/ft
24 Gauge
Galvalume (mill finish)
Order →
$3.35/ft
24 Gauge
Kynar 500 painted
Order →
$5.97/ft
.032 Aluminum
Kynar 500 painted
Order →
$8.49/ft
3 ft minimum panel length. Trims, clips and fasteners for this panel are sold on the order page.
Colors
Available colors
Kynar 500 Colors
PVDF finish · 26ga, 24ga and .032 aluminum · "Special order" = special order in 26ga
SMP Colors
Siliconized modified polyester · 26 gauge
Bare Metal
Galvalume mill finish · 26ga and 24ga
Colors on screen are approximate. Ask for a color chip or see the metal at our Tampa counter before you order.
Technical
Specifications & approvals
Substructure
- Plywood
- 15/32" CDX minimum
- Underlayment
- High-temp self-adhered recommended
- Fasteners
- Low-profile pancake screws (stainless on the coast)
Substrates
- Painted
- AZ50 Galvalume steel (ASTM A792)
- Mill finish
- AZ55 Galvalume steel
- Aluminum
- .032" aluminum, Kynar 500
Approvals & Ordering
- Florida Product Approval
- FL# 30343.2 (steel) / FL# 30343.3 (.032 aluminum)
- Deck
- 15/32" CDX plywood
- Cut length
- 3 ft to 40 ft online, to 55 ft by phone
Tampa warehouse
7001 Causeway Blvd, Tampa, FL 33619 · (813) 410-7427
Pickup in Tampa
Open 7 days, 7am–5pm. Most orders are ready in 3 business days or less, depending on size.
Florida delivery
$290 anywhere in Florida, free on orders over $5,000. Tuff Rib-only orders ship for $230. Most orders are ready in 3 business days or less. Outside Florida? We arrange freight nationwide on larger orders.
FAQ
TrueShield 150 questions
Ready to order TrueShield 150?
Pick your gauge, color and lengths. Pickup in Tampa or delivery across Florida.
Compare other panels
TrueShield 150 from
$2.61/ft