IronSeam 150
16" Snap-Lock Standing Seam · 1.5" Rib
IronSeam 150 is the roof you picture on a new Florida home: crisp 1.5" ribs every 16" and not a single screw showing. Each panel is fastened to the deck with hidden clips, then the next panel snaps over the rib. Nothing goes through the face of the panel, so there is nothing to back out, rust, or leak over time.
$290 flat delivery
Anywhere in Florida, any size order
FREE delivery
On orders over $5,000
Ready in 3 business days
or less, depending on order size
Volume pricing: 3% off $5K+, 5% off $10K+, 8% off $20K+, 10% off $30K+ (aluminum max 5%)
Panel width
16"
Rib height
1.5"
Min. slope
2/12 (lower with hot-melt sealant)
Substrates
26ga or 24ga Galvalume steel; .032" aluminum
About this panel
The Florida home roof, no screws showing
Moves with the heat
The clips let each panel slide slightly as it heats and cools in the Florida sun, which keeps long runs straight on big hip-and-valley roofs. Choose 26ga for most homes, 24ga for extra stiffness and higher wind zones, or .032 aluminum for waterfront homes.
Coast or inland
Pick 26 gauge for most homes, 24 gauge Kynar 500 when the wind zone or the architect calls for a stiffer panel, and .032 aluminum Kynar for waterfront lots where salt spray reaches the roof. Stainless clips are stocked for coastal jobs.
Panel features
Specs at a glance
- Panel width16"
- Rib height1.5"
- Min. slope2/12 (lower with hot-melt sealant)
- AttachmentConcealed clips, snap-lock seam
- Substrates26ga or 24ga Galvalume steel; .032" aluminum
- FinishesGalvalume, SMP, Kynar 500
- LengthCut to length, up to 40 ft online (up to 55 ft by phone)
Panel profile
IronSeam 150
Pricing
Price per linear foot
Cut to your length. Same price online, by phone and at the counter.
26 Gauge
Galvalume (mill finish)
Order →
$2.61/ft
26 Gauge
SMP painted
Order →
$3.66/ft
26 Gauge
Kynar 500 painted
Order →
$4.99/ft
24 Gauge
Galvalume (mill finish)
Order →
$3.35/ft
24 Gauge
Kynar 500 painted
Order →
$5.97/ft
.032 Aluminum
Kynar 500 painted
Order →
$8.49/ft
3 ft minimum panel length. Trims, clips and fasteners for this panel are sold on the order page.
Colors
Available colors
Kynar 500 Colors
PVDF finish · 26ga, 24ga and .032 aluminum · "Special order" = special order in 26ga
SMP Colors
Siliconized modified polyester · 26 gauge
Bare Metal
Galvalume mill finish · 26ga and 24ga
Colors on screen are approximate. Ask for a color chip or see the metal at our Tampa counter before you order.
Technical
Specifications & approvals
Substructure
- Plywood
- 15/32" CDX minimum
- Underlayment
- High-temp self-adhered recommended
- Fasteners
- Low-profile pancake screws (stainless on the coast)
Substrates
- Painted
- AZ50 Galvalume steel (ASTM A792)
- Mill finish
- AZ55 Galvalume steel
- Aluminum
- .032" aluminum, Kynar 500
Approvals & Ordering
- Florida Product Approval
- FL# 30343.11
- Deck
- 15/32" CDX plywood
- Cut length
- 3 ft to 40 ft online, to 55 ft by phone
Tampa warehouse
7001 Causeway Blvd, Tampa, FL 33619 · (813) 410-7427
Pickup in Tampa
Open 7 days, 7am–5pm. Most orders are ready in 3 business days or less, depending on size.
Florida delivery
$290 anywhere in Florida, free on orders over $5,000. Tuff Rib-only orders ship for $230. Most orders are ready in 3 business days or less. Outside Florida? We arrange freight nationwide on larger orders.
FAQ
IronSeam 150 questions
Ready to order IronSeam 150?
Pick your gauge, color and lengths. Pickup in Tampa or delivery across Florida.
Compare other panels
IronSeam 150 from
$2.61/ft